VMC 4020

12.1" Rugged Vehicle Mount Computer with Intel Atom® x7-E3950 Processor, Touchscreen and IP65
  • 產品特色
  • 12.1" XGA TFT LCD monitor with 5-wire resistive touch
  • Built-in Intel Atom® x7-E3950 processor, 1.6GHz
  • Aluminum die-casting and fanless design
  • Analog camera x 3 (CVBS)
  • Ether of completer IP65 housing, or IP65 housing without I/O part
  • Automatic/manual brightness control
  • Isolated CANBus 2.0 x 2
  • 10/100/1000Mhz for independent ethernet x 2
  • On screen F1 ~ F10 programmable function keys
  • Military standard for vibration and shock
  • PoE 802.3af/at (optional)
  • iButton and RFID for ID identification
  • Micro SIM x 2
  • Wide range DC input from 9V ~ 60V DC in
  • Sunlight readable capability: 1,200nits LCD brightness
  • One expansion port reserved
  • Operating system: Windows and Linux
  • CE/FCC/EMark
詢問此產品
產品型錄 (PDF)
LCD Panel 12.1-inch TFT LCD panel with LED backlight 1024 x 768 pixels (XGA) Brightness: 1200 cd/m² (typical) Viewing angle: 170° (H):170°(V) Contrast ratio: 750:1 (typical)
Touch Screen Sensor 5-wire resistant touch Anti-glare coating surface Transmission rate: 81 ± 3%
CPU & Chipset Intel Atom® x7-E3950 processor dual core 1.6GHz memory One 204-pin DDR3L 1600MHz SO-DIMM slot (default: 4GB)
Expandable Storage 1 x CFast 1 x 2.5" SATA SSD bay
Expansion 3 x Full-size mini-PCIe socket (PCIe + USB) 1 x Full-size mini-PCIe socket (USB) 1 x CFast 2 x Micro SIM slot
I/O Interface-Front LCD back light on/off Volume control (+/-) Brightness control (+/-) Light sensor 4 x LED indicators (power, WLAN, shift, storage) F1 ~ F10 programmable function 2 x Built-in 2W speakers
I/O Interface-Lateral Right Side:
- 1 x CFast card slot
- 1 x System reset button
- 1 x USB 2.0 host type A connector Left Side:
- 1 x Antenna for WWAN
I/O Interface-Bottom (VMC 4020-4A1, IP65) 1 x M12 (22 pins)
- 1 x 10/100/1000, LAN1 (wake up on LAN)
- 1 x RS232 (Tx/Rx)/RS422/RS485 (RI, 5V/0.5A, 12V/0.5A)
- 1 x DR (Odometer + Speed )
- 2 x GPI
    Source: 9V ~ 60V-in (default)
    Sink: external 0V ~ 60VDC pull-high selected by software settings
    Input High "1" Voltage: 3.3 ~ 60 VDC
    Input Low "0" Voltage: 0 ~ 2 VDC
- 2 x GPO
    Source: 9V ~ 60V-in (default)
    12V/6mA, 24V/12mA, 36V/18mA, 48V/24mA, 60V/30mA
    Sink: external max. 0.5A pull high 1 x M12 (21-pin)
- 1 x Mic-in
- 1 x Line-out
- 1 x Full RS232/422/485 (RI, 5V/0.5A, 12V/05A)
- 2 x Isolated CANBus 2.0B
    When installing CAN06, CAN2 becomes J1939/ISO 15765-4
    When installing CAN05, CAN2 becomes J1708
- 1 x iButton 1 x M12 (5-pin)
- 9V ~ 60V DC in 1 x M12 (8-pin)
- Either of DC output or RFID
    1 x DC output (12V/2A)
    1 x RFID (Tx/Rx, 12V/2A) 1 x M12 (8-pin)
- 1 x 10/100/1000, LAN2 (optional for 802.3af/at) 1 x M12 (8-pin)
- 2 x USB Type A 1 x M12 (18-pin)
- Expansion port 1 x GPS Antenna SMA connector (On housing)
I/O Interface-Bottom (VMC 4020-4A0, Front IP65) 1 x Mic in and Line out 2 x RJ45 10/100/1000
- LAN1, wake up on LAN
- LAN2, optional for 802.3at 1 x USB type A 1 x DB9 full RS232/422/485 (RI, 5V/0.5A, 12V/05A) 1 x 26 pins connector:
- 1 x Full RS232/422/485 (RI, 5V/0.5A, 12V/05A)
- 1 x RFID (Tx/Rx)
- 2 x Isolated CAN 2.0B
- 1 x J1939/ISO15765-4 or J1708 (CAN06 or CAN05)
    When installing CAN06, CAN2 becomes J1939/ISO 15765-4
    When installing CAN05, CAN2 becomes J1708
- 1 x DR (Odometer + Speed)
- 1 x iButton
- 1 x GPI
    Source: 9V ~ 60V-in (default)
    Sink: external 0V ~ 60DC pull-high selected by software settings
    Input High "1" Voltage: 3.3 ~ 60 VDC
    Input Low "0" Voltage: 0 ~ 2 VDC
- 2 x GPO
    Source: 9V ~ 60V-in (default)
    12V/6mA, 24V/12mA, 36V/18mA, 48V/24mA, 60V/30mA
    Sink:external external max. 0.5A pull high 1 x DB15 for expansion port 1 x 3-pin terminal block
- 9V ~ 60V DC in
I/O Interface-Top 2 x Antenna for Wi-Fi
Mechanical Cooling system: fanless Enclosure: aluminum die castig Mounting: VESA 75 Ingress protection: complete IP65, or IP65 without covering the bottom Dimension: 339.97mm(W) x 261.97mm(H) x 75.10mm(D) Weight: 5kg
Power Management 9V ~ 60V DC in Reverse protection/over voltage protection/under voltage protection Ignition on/off control & programmable on/off delay timing Wake up by LAN1, SMS, RTC and ignition
Environment Operating temperatures: Ambient with air -30°C to 60°C Storage temperatures: -30°C to 70°C Relative humidity: 10% to 90% (non-condensing) Vibration
- Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
- Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24 Shock
- Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers = 40g
- Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment = 75g
Operating System Windows 10, Linux
Standards/Certifications CE/FCC class B/E13
詢問清單
Take a minute and tell us what you think!