CPU | Intel Atom® x5-E3930 processor dual core 1.3GHz |
Memory | 1 x 204-pin DDR3L SO-DIMM socket support 1866MHz up to 8GB. Default 4GB |
Expansion | 1 x mini-PCIe socket (USB) 1 x mini-PCIe socket (PCIe + USB + mSATA) |
Function | 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) or optional module with Dead Reckoning Built-in G-sensor Built-in TPM |
I/O Interface-Front | 1 x power button 4 x LED indicators for status, storage, WLAN and WWAN 1 x system reset button 2 x type A USB 3.0 compliant host, supporting system boot up 1 x DB-15 VGA 1 x HDMI 1 x SIM card socket |
I/O Interface-Rear |
1 x 9~36VDC input with Ignition and 20W typical power consumption
1 x 12V/2A DC output, SMBus, power button
1 x RJ45 with LEDs for 10/100/1000Mbps Ethernet
1 x Audio-in, 1 x Audio-out
1 x DB9 COM port for 4 x RS232 Tx/Rx and 2 x RS485
1 x DB15 for multi port - 1 x CAN2.0 (optional SAE J1939) - 1 x RS232 Tx/Rx - 1 x odometer and direction for optional DR - 5 x programmable DIO Input voltage (internal type): 5VDC TTL (default) Input voltage (source type): 3~24VDC Digital output (sink type): 5VDC TTL (default), max current: 20mA Digital output (source type): 3~24VDC 3 x Antenna hole for SMA-type antenna (WWAN/WLAN/GPS) |
Expandable Storage | 1 x 2.5” SSD SATA 3.0 1 x mSATA |
Operating System | Windows 10 Linux YOCTO (by request) |
Power Management | Selectable boot-up & shut-down voltage for low power protection HW design ready for 8-level delay time on/off at user's self configuration Power on/off ignition, software detectable Support S3, S4 suspend mode |
Dimensions | 185mm (W) x 120mm (D) x 45mm (H) (7.3" x 4.7" x 1.8") 1 kg (2.20 lbs) |
Construction | Aluminum top case with sheet metal |
Environment |
-40°C to 70°C (w/ industrial SSD) with air flow
Storage temperatures: -40°C to 85°C
Relative humidity: 10% to 90% (non-condensing)
Vibration:
Vibration (SSD): 2g @5~500 Hz Operating: MIL-STD-810F, Method 514.5, Category 20, Ground Vehicle – Highway Truck Storage: MIL-STD-810F, Method 514.5, Category 24, Integrity Test Shock (SSD): Operating: MIL-STD-810F, Method 516.5, Procedure I, Trucks and semi-trailers=20g Crash hazard: MIL-STD-810F, Method 516.5, Procedure V, Ground equipment=75g |
Standards/Certifications | CE approval FCC Class A E13 mark |