ATC 3562-IP7-NA4M

Edge AI 車載電腦，搭載 NVIDIA® Jetson Orin Nano™
  • 產品特色
  • 內建 NVIDIA® Jetson Orin Nano™ 8GB SoM，在超級模式下，AI 效能最高可達 67 TOPS
  • 堅固、無風扇設計，符合 IP67 防護等級
  • 4-CH GMSL2 和 2 x GbE 可連接攝影機和 LiDAR 感測器
  • 支援 HEVC/H.265 硬體解碼，最高可處理 11 組 1080p@30Hz
  • 寬溫範圍達 -25°C~65°C
  • 採用超高速 PCIe 4.0 x4 NVMe SSD，確保數據完整性
  • 可擴充 GNSS、LTE/5G NR 及 Wi-Fi 5/6 模組
  • 支援 DC 9V~36V 和 24V 鐵路電源輸入，具備引擎啟動控制及過電流／過電壓保護（OCP/OVP）
  • 搭載 NEXCOM Acceleration Linux (NAL) OS，整合 JetPack 6.2
  • 符合 MIL-STD-810H 軍規標準，具備抗震／抗衝擊能力
  • CE/FCC、UKCA、E-mark、EN 50155、EN 45545-2 認證
詢問此產品
產品型錄 (PDF)
NVIDIA® Jetson Orin Nano™ SoM Jetson Orin Nano™ 8GB
-CPU: 6-core Arm® Cortex®-A78AE v8.2 64-bit, 1.5MB L2 + 4MB L3
-GPU: 1024-core NVIDIA® Ampere architecture with 32 Tensor Cores
-Memory: 8GB 128-bit LPDDR5 102GB/s, 2133/3199MHz in frequency
-AI performance: 67 TOPS in Super Mode OpenGL 4.6, OpenGL ES 3.2, CUDA® 11.4 and Vulkan 1.1 260-pin SO-DIMM form factor compatible with Orin™ NX NVIDIA® JetPack 6.2
Storage/Boot Disk 1 x M.2 Key M 2280 PCIe 3.0 x4 NVMe SSD, 128GB in default
Expansion Slot 1 x M.2 Key E 2230 (PCIe 4.0 + USB 2.0) 1 x M.2 Key B 3042/3052 (USB 3.2) with 2 x nano-SIM slot
Display 1 x HDMI® 2.0a/b, up to 3840x2160@60Hz, waterproof
G-Sensor 3D accelerometer and 3D gyroscope, ST LSM6DSLTR
LAN 2 x 1GbE M12 X-coded connector
-9Kbyte Jumbo frame, PTP (IEEE 1588) supported
-Switching: Realtek RTL8367RBI-VH-CG-I
-PoE+ (30W PSE) in option
MIPI/GMSL2 4-CH MIPI SerDes/GMSL2 ports Controller: Maxim MAX96712 PoC (Power over Cable) Cable length: up to 15 meters Connector: FAKRA Z-coded e-con Systems® GMSL2 camera:
-STURDeCAM21
-STURDeCAM25
-STURDeCAM31 Appro GMSL2 camera:
-E-09 (IMX415 (4K) + ISPi (YUV) + MAX9295)
-E-10 (IMX335 (5M) + ISPi (YUV) + MAX9295)
-E-11 (AR0234 (2.3M) + ISPi (YUV) + MAX9295) StereoLabs camera:
-ZED X (stereo CAM)
-ZED X One (mono CAM) Leopard GMSL2 camera:
-LI-AR0234CS-GMSL2-OWL
-LI-AR0234CS-STEREO-GMSL2-30 (stereo CAM)
USB 2 x USB 3.2 (DB 15, waterproof)
-5V@900mA each
-up to 5Gbit/s link speed & compliance with USB 2.0 (LS/FS/HS link speed) 1 x OTG Micro-USB (w/ a door)
Serial Port 1 x RS-232 (Tx, Rx) 1 x Console (Tx, Rx), wafer reserved RS-232 working voltage ± 9V, baud rate up to 115.2kb/s Connector: MULTI-port (M12 A-coded)
DI/DO (w/ isolation) 4-Bit input
-Source: DC 9V~36V (12V@0.6mA/24V@1.2mA)
-External: DC 0V~33V pull-high, high-level, DC 3.3V~33V; low-level, DC 0V~2V 4-Bit output
-Source: DC 9V~36V (nominal 35mA@24V)
-External: DC 5V~27V pull-high, sink current w/ 220mA for each bit, 500mA max (@25C) Source or external can be selected by software (default: source type) Connector: MULTI-port (M12 A-coded)
CAN bus 1 x CAN FD, compatible with CAN 2.0A/2.0B IEC 61000-4-2 Electrostatic Discharge (ESD): ± 4KV/8KV (contact/air, whole system) Up to 5Mb/s in data transmit, 2.5KV isolated Connector: MULTI-port (M12 A-coded)
GPS u-blox NEO-M9N GNSS module for GPS/GLONASS/QZSS/Galileo/Beidou Optional DR (dead reckoning) function, NEO-M9V
Power Supply Nominal voltage: DC 9V~36V/24V rail Cranking voltage: 6V~9V (less than 20 sec) OCP & UVP (shut down once exceeding 37V) Ignition on/off control & programmable on/off delay timer Optional for remote power on/off trigger (wafer reserved)
I/O Interface Front 12 x LED indicator 1 x Reset button 2 x nano-SIM slot, 1 x OTG (w/ a door) 1 x HDMI® (waterproof) 2 x USB 3.2 (DB15, waterproof) 2 x Antenna hole for Wi-Fi 5/6 module (PR-SMA ant.) 1 x Antenna hole for GNSS (RP-SMA ant.)
I/O Interface Rear 9V~36V rail DC-in, K-coded 4 x Fakra Z-code & 2 x GbE M12 X-coded connector 1 x MULTI M12 A-coded connector (1 x RS-232 , 1 x CAN, 4DI/4DO)
I/O Interface Side 4 x Antenna hole for LTE/5G module (SMA ant.)
Mechanical Dimensions: 242.1mm (W) x 167mm (D) x 92.4mm (H) (w/ mount bracket) Weight: 2.4kg
Environment Operating temperature:
--25°C~65°C (fanless, in Super Mode)
--25°C~70°C (fanless, in Normal Mode) Storage temperature: -40°C~85°C Relative humidity: 10%~95% (non-condensing)
Vibration & Shock Vibration in operating
-MIL-STD-810G, 514.8C, Procedure 6, Category 4
-IEC 60068-2-64: 2.0g@5Hz~500Hz
-MIL-STD-810G, 514.6E, Procedure 1, Category 24, 7.7g approx. Shock
-Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g -Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Certifications CE/FCC, UKCA, E-mark, EN 50155, and EN 45545-2
Operating System NEXCOM Aided Linux (NAL) w/ Jetpack 6.2 integrated
-NEXCOM custom functions (GNSS, 5G NR, 6-axis sensor, MCU control)
-V4L2
-Ubuntu 22.04@Kernel 5.15
Accessories External cable:
-Power cable, 30cm
-M12 MULTI-port adapter cable, 20cm
詢問清單
Take a minute and tell us what you think!