Specifications
| CPU Support | - Socket 478uFCPGA/479uFCBGA
- Supports Intel® Pentium® M: 2 MB on Die L2 Cache, 400 MHz FSB, speed up to 2.0 GHz
- Supports Intel® Pentium® M: 1 MB on Die L2 Cache, 400 MHz FSB, speed up to 1.7 GHz
- Supports Intel® Celeron® M: 512 KB on Die L2 Cache, 400 MHz FSB, speed up to 1.5 GHz
|
| Main Memory | - Two 184-pin DDR DIMM support up to 2 GB unbuffered non-ECC DDR SDRAM memory
|
| Chipset | |
| BIOS | - Award System BIOS
- ACPI Support
- Advanced Power Management support
- 4 Mbit Flash ROM
|
| On-board LAN | - Marvell Gigabit Ethernet LAN 8001 x 2 (one is optional)
- RJ45 x 2 with LED
|
| Display | - Intel® 852GM integrated dynamic video shared memory, 64 MB max, adjustable by OS
- Resolution: Up to 1600 x 1200 for CRT or up to 1280 x 1024 for TFT
- D-sub 15-pin VGA port x 1
- Internal LVDS: Supports 18-bit single pixel or 18-bit dual pixel LVDS panels (Resolution support up to 1400 x 1050)
- Dual display: Simultaneous Scan-CRT + LVDS LCD, Dual View-CRT + LVDS LCD
|
| I/O Interface | - Serial port x 2, with 2 x 16C550 UARTs. (9-pin D-sub connector x 1, 10-pin header x 1)
- USB 2.0: 6 ports (4 from combo connector with RJ45, 2 from 6-pin header)
- HDD: 40-pin connector x 2, supports ultra ATA 33/66/100 (Default: IDE channel 1)
- Optional CompactFlash socket: Internal CompactFlash socket x 1 (Default: IDE channel 2 master), Type-II CompactFlash cards supported
- Parallel: 25-pin D-sub connector, bi-directional, EPP/ECP support
- Floppy: 34-pin connector x 1
- PS/2 Keyboard/Mouse: Mini-DIN connector x 2
- AC'97 audio: Phone jack x 1 (Line-in / Line-out / Mic-in)
- On-board CD-in and Aux-in
- GPIO: 4 in, 4 out
- IrDA: On-board 5-pin header for IrDA Tx Rx
|
| Watchdog Timer | - Programmable via GAL by Software from 1-127 sec. Or 1-127 min.
|
| On-board RTC | - On-chip RTC with external Lithium battery back up
|
| ISA Support | - Through PCI to ISA Interface
- No support for ISA DMA
|
| System Monitor | - Driver support for WIN2000, XP, XPe, Linux
- Voltage, temperature and fan monitoring
|
| Power Input | - Standard ATX 20-pin power connector
|
| Power Requirements | - Measured with Intel Pentium M 2.0 GHz
- +12 V: 0.5 A
- +5 V: 5.5 A
- +3.3 V: 1 A
- +5 Vsb: 0.1 A
|
| Dimensions | |
| Environment | - Board Level Operating Temperature: 0°C to 60°C
- Storage Temperature: -20°C to 80°C
- Relative Humidity: 10% to 90% non-condensing
|
| Certifications | |