Specifications
| CPU Support | - Single mPGA478 ZIF socket
- Intel® Pentium® 4 Processor with HT Technology, with 1M L2 cache (Intel® Prescott (0.09μ process) / Intel® Pentium® 4 Processor with 256/512K L2 cach (Northwood) on die
- Socket 478 processor supports 400/533/800 MHz FSB, CPU speeds up to 3.6 GHz
- Supports Hyper-Threading technology (for all Prescott processors, or Northwood 3.06 GHz)
|
| Main Memory | - Four 184-pin DDR DIMM sockets, supports up to 4 GB unbuffered ECC DDR 266/333/400 SDRAM (Note: Maximum 4 GB. Actual memorey size is dynamic based on the OS I/O resource allocation)
- Available bandwidth up to 3.2 GB/s (DDR 400) for single-channel mode and 6.4 GB/s (DDR 400) in dual-channel mode
|
| Chipset | - Intel® 875P/6300ESB Chipsets
- Firmware Hub (FWH) 4 Mbit fl ash ROM x 1
|
| BIOS | - Award System BIOS
- Plug & Play support
- Advanced Power Management support
- Advanced Confi guration & Power Interface support
- Jumperless for CPU FSB
- 4 Mbit fl ash ROM
- Supports Power On After Power Failure
|
| On-board LAN | - Intel® 82551QM 10/100 Ethernet controller x 1
- Optional Intel 82547GI Gigabit Ethernet controller x 1 (dedicated by CSA port directly from the Intel® 875P)
- Compliant with PCI V2.1/2.2. IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab
- RJ45 with LED connector x 2
|
| Display | |
| I/O Interface | - Winbond W83627HF Super I/O on board
- SIO x 4, DB9 x 2, 10-pin header x 2,
- PIO x 1, Bi-directional, EPP/ECP support, DB25 x 1
- Floppy Disk controller: 3.5" 1.44 MB/2.88 MB support, 34-pin connector x 1
- On-chip enhanced IDE x 2, PIO up to mode 4, Ultra ATA 33/66/100 support, total of 4 EIDE device support, 40-pin connector x 2
- PS/2 Keyboard/Mouse Mini-Din connector x 2
- GPIO (4 in, 4 out) pin header
- On-board USB 2.0 ports x 4
- On-board buzzer x 1
- 2-pin power on button switch
- On-board 4-pin header for SM bus (I2C)
- On-board 2-pin header for reset SW, 4-pin for speaker, 5-pin for keylock and 2-pin for power LED, 2-pin for IDE HDD Led
- Serial ATA support, SATA connector x 2; data transfer bandwidth up to 150 MB/s, RAID 0, 1 supported (for two HDD)
|
| On-board RTC | - On-chip real time clock with battery back up
|
| Disk On Module | - On-board reserved power pin for DOM (Disk On Module)
|
| ISA Support | - Through PCI to ISA interface
- No ISA Master Device support
- No ISA DMA support
- Maximum of 3 ISA slots supported
|
| System Monitor | - System monitor controller derived from Winbond W83627HF super I/O
- 7 voltage (For +3.3 V, +5 V, +12 V, Vcore, +2.5 V, +5 Vsb)
- 3 fan speed (For CPU x 1, system x 2)
- 3 temperature (For CPU x 1, system x 2)
|
| Power Requirements | - +3.3 V: 11 A
- +5 V: 17 A
- +12 V: 14 A for Prescott P4 or 11 A for Northwood P4
- 5 Vsb: 2 A
|
| Dimensions | - ATX form factor: 305 mm (L) x 244 mm (W) (12" x 9.6")
|
| Environment | - Operating temperature: 0°C to 60°C
- Storage temperature: -20°C to 80°C
- Relative humidity: 10% to 90% (Non-condensing)
|
| Certifications | |